Reminder: In order to use OS ONE, you must first check that your inverter is compatible with the OS ONE interface: Check compatibility
Once you have verified this, you must be present at the installation site and equipped with a computer, tablet or smartphone with an Internet browser.
First, connect to the router with an Ethernet cable. Check that you have access to the Internet. Once done, go to the list of devices detected by your machine (as shown below)
You should see a device with the serial number of your inverter (you can get the serial number by looking under the inverter). Click on this device and wait a few seconds for the page to load.
You will then arrive on the login page. You just have to connect using the following credentials:
-Name : user@local
-Password : password