How to connect the inverter to the internet via Ethernet cable ? [FA49]

Modified on Tue, 24 May, 2022 at 12:12 PM

To connect the inverter to Internet via Ethernet cable, use an RJ45 cable and connect it from the "ETH" port of the inverter to your router. Check that the LEDs are blinking on the "ETH" port of the inverter. 


If this is not the case, your cable or router must be defective. Please check with your customer the cable used and the router. 

If the LEDs on the "ETH" port of the inverter are blinking, the communication between the inverter and the router has started.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article